Ring clutch

The ring clutch consists of a shackle and a cluch head. The shackle is free to move in any direction..

Locking bolt

Ring clutches with worn or bent locking bolts.

Clutch head

Clutch head – check Wear on the clutch head using the table.

Plate-lift H-Anchor

The Plate-Lift H-Anchor is Unique in design simplicity. It offers exceptional strength for lifting and handling precast elements, yet can be used in panels as thin as 3″.

Ring lift erection anchor with shear plate

Combines the reinforcing capabilities of the Ring Lift Anchor with the spall-free performance of the Erection Anchor.

Ring lift plate anchor

Used for face and back lifts of thin walled units.

Spread anchor

The spread anchor is very versatile. It provides an efficient Anchorage in both thin panels and slabs.

Erection anchor

The special shaped anchor head Means that the pitching/turning loads are taken by the anchor and not to the concrete.

X-foot erection anchor

For horizontal to vertical edge lifts and the shear rotation and thin-walled units.

X-foot erection anchor with shear plate

For horizontal to vertical edge lifts and the shear rotation of thin-walled units.

Plate-lift erection anchor

Plate-Lift Erection Anchors are specifically designed for horizontal to vertical edge lifts and handling of thin-walled precast concrete elements.

Plate-lift erection anchor with shear plate

Plate-Lift Erection Anchor with Shear Plate is designed specifically for edge tilting precast concrete elements from the horizontal to a vertical position.

Plate-lift flat foot anchor

The Plate-Lift Flat Foot Anchor is a versatile anchor that can be used to back-strip and transport thin panels .

Plate-Lift Erection Anchor with 45° head and shear Plate

Plate-Lift Erection Anchor with 45° Head and Shear Plate is designed for use when the lifting edge is beveled at a 45° angle.

Plate-Lift L-Anchor

Plate-Lift L-Anchor is a very efficient anchor. This anchor is used for both stripping and erection carrying tension and/or shear loads.

Fleet-Lift Sandwich Panel Erection Anchor

The Fleet-Lift Sandwich Panel Erection Anchor is designed to erect precast, insulated sandwich panels with a minimum loss of insulation.

Fleet-lift sandwich panel erection anchor with shear plate

The P-92-SP sandwich Panel Erection Anchor is similar in design and action to the P-92-S except it is smaller overall and has a boult-in shear plate.

Two-hole anchor

Used for stripping panels from tilt tables and tripping panels.

New Generation forged foot erection anchor

The New Generation Forged Foot Erection Anchor is ideal for horizontal to vertical edge lifts and shear rotation of thin-walled units.

Plate lift forged erection anchor

Forged Erection Anchor is specifically designed to provide greater lifting capacities for horizontal to vertical edge lifts.

Cast eye nut and bolts

Fabricated of ductile iron, the cast eye nut is threaded all the way through with coil thread and eliminates the need to inventory many different lengths of cast eye bolts..

Recess former

The Universal-Head Lifting Clutch is an attachment link for the lifting and transportation of precast concrete units in combination with the spherical-head lifting anchor.